Description
Brand - RBC
Item Number - SJ 7174* RBC
Category - Pitchlign Precision Ground Heavy Duty Needle Roller Bearings
Principal Dimensions & Load Ratings (Imperial) :
Nominal Inside Diameter (Fw) - 0.875 inch
Minimum Inside Diameter (Fw) - 0.8759 inch
Maximum Inside Diameter (Fw) - 0.8768 inch
Maximum Outside Diameter (D) - 1.375 inch
Minimum Outside Diameter (D) - 1.3745 inch
Width (B) - 1 inch
Maximum Housing Fillet (r1) - 0.04 inch
Approximate Weight - 0.169 lbs
Housing Shoulder Diameter - 1.1875 inch
Dynamic Capacity (C) - 6300 lbf
Static Capacity (C0) - 9700 lbf
Limit Speed - 15000 rpm
Maximum Recommended Shaft Diameter (ISO h6, use with H7 hsg fit) - 0.875 inch
Minimum Recommended Shaft Diameter (ISO h6, use with H7 hsg fit) - 0.8745 inch
Maximum Recommended Shaft Diameter (ISO f6, use with N7 hsg fit) - 0.8742 inch
Minimum Recommended Shaft Diameter (ISO f6, use with N7 hsg fit) - 0.8737 inch
Minimum Recommended Housing Bore (Slip Fit ISO H7) - 1.375 inch
Maximum Recommended Housing Bore (Slip Fit ISO H7) - 1.376 inch
Mean Fit Recommended Housing Bore (Slip Fit ISO H7) - 0.0007L inch
Minimum Recommended Housing Bore (Press Fit ISO H7) - 1.3737 inch
Maximum Recommended Housing Bore (Press Fit ISO H7) - 1.3747 inch
Mean Fit Recommended Housing Bore (Press Fit ISO H7) - 0.0005T inch
MS 51961 Suffix ** - (-6)
Principal Dimensions & Load Ratings (Metric) :
Approximate Weight - 0.076657048 kg
Other salient points to be noted :
• The part numbers of matching inner rings are the same as the corresponding bearing numbers, except the prefix SJ is replaced by the prefix IR. Alternate inner rings with different bores are available for several bearings. Alternate inner rings carry suffix -C or -D
• Example: Matching inner rings for bearing SJ 7315 (1 /34” x 2 5/8” x 1 1/4”):
a) IR 7315 (1 7/16”ID x 1 3/4”OD x 1 1/4”W) or,
b) IR 7315 C (1 1/2”ID x 1 3/4”OD x 1 1/4”W)
• Inner rings must be ordered separately
* These bearings have a radius at both ends of the outer ring. All other outer rings are manufactured with a radius at one end and a break corner at the other.
** The bearings meet Military Standard MS 51961
♦ ♦ Images are for representation purposes only
Item Number - SJ 7174* RBC
Category - Pitchlign Precision Ground Heavy Duty Needle Roller Bearings
Principal Dimensions & Load Ratings (Imperial) :
Nominal Inside Diameter (Fw) - 0.875 inch
Minimum Inside Diameter (Fw) - 0.8759 inch
Maximum Inside Diameter (Fw) - 0.8768 inch
Maximum Outside Diameter (D) - 1.375 inch
Minimum Outside Diameter (D) - 1.3745 inch
Width (B) - 1 inch
Maximum Housing Fillet (r1) - 0.04 inch
Approximate Weight - 0.169 lbs
Housing Shoulder Diameter - 1.1875 inch
Dynamic Capacity (C) - 6300 lbf
Static Capacity (C0) - 9700 lbf
Limit Speed - 15000 rpm
Maximum Recommended Shaft Diameter (ISO h6, use with H7 hsg fit) - 0.875 inch
Minimum Recommended Shaft Diameter (ISO h6, use with H7 hsg fit) - 0.8745 inch
Maximum Recommended Shaft Diameter (ISO f6, use with N7 hsg fit) - 0.8742 inch
Minimum Recommended Shaft Diameter (ISO f6, use with N7 hsg fit) - 0.8737 inch
Minimum Recommended Housing Bore (Slip Fit ISO H7) - 1.375 inch
Maximum Recommended Housing Bore (Slip Fit ISO H7) - 1.376 inch
Mean Fit Recommended Housing Bore (Slip Fit ISO H7) - 0.0007L inch
Minimum Recommended Housing Bore (Press Fit ISO H7) - 1.3737 inch
Maximum Recommended Housing Bore (Press Fit ISO H7) - 1.3747 inch
Mean Fit Recommended Housing Bore (Press Fit ISO H7) - 0.0005T inch
MS 51961 Suffix ** - (-6)
Principal Dimensions & Load Ratings (Metric) :
Approximate Weight - 0.076657048 kg
Other salient points to be noted :
• The part numbers of matching inner rings are the same as the corresponding bearing numbers, except the prefix SJ is replaced by the prefix IR. Alternate inner rings with different bores are available for several bearings. Alternate inner rings carry suffix -C or -D
• Example: Matching inner rings for bearing SJ 7315 (1 /34” x 2 5/8” x 1 1/4”):
a) IR 7315 (1 7/16”ID x 1 3/4”OD x 1 1/4”W) or,
b) IR 7315 C (1 1/2”ID x 1 3/4”OD x 1 1/4”W)
• Inner rings must be ordered separately
* These bearings have a radius at both ends of the outer ring. All other outer rings are manufactured with a radius at one end and a break corner at the other.
** The bearings meet Military Standard MS 51961
♦ ♦ Images are for representation purposes only
