Description
Brand - RBC
Item Number - SJ 7133* RBC
Category - Pitchlign Precision Ground Heavy Duty Needle Roller Bearings
Principal Dimensions & Load Ratings (Imperial) :
Nominal Inside Diameter (Fw) - 0.625 inch
Minimum Inside Diameter (Fw) - 0.6258 inch
Maximum Inside Diameter (Fw) - 0.6267 inch
Maximum Outside Diameter (D) - 1.125 inch
Minimum Outside Diameter (D) - 1.1245 inch
Width (B) - 0.75 inch
Maximum Housing Fillet (r1) - 0.04 inch
Approximate Weight - 0.109 lbs
Housing Shoulder Diameter - 0.9375 inch
Dynamic Capacity (C) - 3900 lbf
Static Capacity (C0) - 4800 lbf
Limit Speed - 21000 rpm
Maximum Recommended Shaft Diameter (ISO h6, use with H7 hsg fit) - 0.625 inch
Minimum Recommended Shaft Diameter (ISO h6, use with H7 hsg fit) - 0.6246 inch
Maximum Recommended Shaft Diameter (ISO f6, use with N7 hsg fit) - 0.6244 inch
Minimum Recommended Shaft Diameter (ISO f6, use with N7 hsg fit) - 0.6239 inch
Minimum Recommended Housing Bore (Slip Fit ISO H7) - 1.125 inch
Maximum Recommended Housing Bore (Slip Fit ISO H7) - 1.1258 inch
Mean Fit Recommended Housing Bore (Slip Fit ISO H7) - 0.0006L inch
Minimum Recommended Housing Bore (Press Fit ISO H7) - 1.1239 inch
Maximum Recommended Housing Bore (Press Fit ISO H7) - 1.1247 inch
Mean Fit Recommended Housing Bore (Press Fit ISO H7) - 0.0004T inch
MS 51961 Suffix ** - (-1)
Principal Dimensions & Load Ratings (Metric) :
Approximate Weight - 0.049441528 kg
Other salient points to be noted :
• The part numbers of matching inner rings are the same as the corresponding bearing numbers, except the prefix SJ is replaced by the prefix IR. Alternate inner rings with different bores are available for several bearings. Alternate inner rings carry suffix -C or -D
• Example: Matching inner rings for bearing SJ 7315 (1 /34” x 2 5/8” x 1 1/4”):
a) IR 7315 (1 7/16”ID x 1 3/4”OD x 1 1/4”W) or,
b) IR 7315 C (1 1/2”ID x 1 3/4”OD x 1 1/4”W)
• Inner rings must be ordered separately
* These bearings have a radius at both ends of the outer ring. All other outer rings are manufactured with a radius at one end and a break corner at the other.
** The bearings meet Military Standard MS 51961
♦ ♦ Images are for representation purposes only
Item Number - SJ 7133* RBC
Category - Pitchlign Precision Ground Heavy Duty Needle Roller Bearings
Principal Dimensions & Load Ratings (Imperial) :
Nominal Inside Diameter (Fw) - 0.625 inch
Minimum Inside Diameter (Fw) - 0.6258 inch
Maximum Inside Diameter (Fw) - 0.6267 inch
Maximum Outside Diameter (D) - 1.125 inch
Minimum Outside Diameter (D) - 1.1245 inch
Width (B) - 0.75 inch
Maximum Housing Fillet (r1) - 0.04 inch
Approximate Weight - 0.109 lbs
Housing Shoulder Diameter - 0.9375 inch
Dynamic Capacity (C) - 3900 lbf
Static Capacity (C0) - 4800 lbf
Limit Speed - 21000 rpm
Maximum Recommended Shaft Diameter (ISO h6, use with H7 hsg fit) - 0.625 inch
Minimum Recommended Shaft Diameter (ISO h6, use with H7 hsg fit) - 0.6246 inch
Maximum Recommended Shaft Diameter (ISO f6, use with N7 hsg fit) - 0.6244 inch
Minimum Recommended Shaft Diameter (ISO f6, use with N7 hsg fit) - 0.6239 inch
Minimum Recommended Housing Bore (Slip Fit ISO H7) - 1.125 inch
Maximum Recommended Housing Bore (Slip Fit ISO H7) - 1.1258 inch
Mean Fit Recommended Housing Bore (Slip Fit ISO H7) - 0.0006L inch
Minimum Recommended Housing Bore (Press Fit ISO H7) - 1.1239 inch
Maximum Recommended Housing Bore (Press Fit ISO H7) - 1.1247 inch
Mean Fit Recommended Housing Bore (Press Fit ISO H7) - 0.0004T inch
MS 51961 Suffix ** - (-1)
Principal Dimensions & Load Ratings (Metric) :
Approximate Weight - 0.049441528 kg
Other salient points to be noted :
• The part numbers of matching inner rings are the same as the corresponding bearing numbers, except the prefix SJ is replaced by the prefix IR. Alternate inner rings with different bores are available for several bearings. Alternate inner rings carry suffix -C or -D
• Example: Matching inner rings for bearing SJ 7315 (1 /34” x 2 5/8” x 1 1/4”):
a) IR 7315 (1 7/16”ID x 1 3/4”OD x 1 1/4”W) or,
b) IR 7315 C (1 1/2”ID x 1 3/4”OD x 1 1/4”W)
• Inner rings must be ordered separately
* These bearings have a radius at both ends of the outer ring. All other outer rings are manufactured with a radius at one end and a break corner at the other.
** The bearings meet Military Standard MS 51961
♦ ♦ Images are for representation purposes only
