MB60 RBC

Brand - RBC
Item Number - MB60 RBC
Category - Radial spherical Plain Bearing
Basic Part Number - (-60)

Principal Dimensions & Load Ratings (Metric) :
Nominal Inside Diameter (d) - 60 (-0.015) mm
Nominal Outside Diameter (D) - 90 (-0.015) mm
Nominal Inner Ring Width (B) - 44 (-0.15) mm
Nominal Outer Ring Width (C) - 36 (-0.40) mm
Sphere Diameter (K) - 81 mm
Unmounted Diametral Clearance - 0.10/0.20 mm
Shaft Shoulder Diameter (d1) - 68 mm
Tilt Angle (α) - 7°
Maximum Shaft Fillet (r1) - 1 mm
Maximum Housing Fillet (r2) - 1 mm
Approximate Weight - 1.05 kg
Static Radial Load Limit - 1250 kN
Static Thrust Load Limit - 219 kN
Static Dynamic Load Limit - 250 kN
Maximum Recommended Shaft Diameter ISO f6 (Slip Fit) - 59.97 mm
Minimum Recommended Shaft Diameter ISO f6 (Slip Fit) - 59.951 mm
Maximum Recommended Shaft Diameter ISO m5 (Press Fit) - 60.024 mm
Minimum Recommended Shaft Diameter ISO m5 (Press Fit) - 60.011 mm
Maximum Recommended Housing Bore ISO R7 (Press Fit) - 89.962 mm
Minimum Recommended Housing Bore ISO R7 (Press Fit) - 89.927 mm

Notes about MB Series :
These bearings are built to handle substantial radial loads even when misalignment occurs. They can also support a moderate amount of thrust load. Featuring a non-separable design with a single split outer ring, they are offered in both open and sealed configurations, and are available in both inch and metric dimensions.

Other salient point to be noted :
• All dimensions apply before MoS2 coating and Fracture.

♦ ♦ Images are for representation purposes only