Description
Brand - RBC
Item Number - B40-L RBC
Category - Radial spherical Plain Bearing
Basic Part Number - (-40)
Principal Dimensions & Load Ratings (Imperial) :
Nominal Inside Diameter (d) - 2.5 inch
Maximum Inside Diameter (d) - 2.5 inch
Minimum Inside Diameter (d) - 2.4994 inch
Nominal Outside Diameter (D) - 3.9375 inch
Maximum Outside Diameter (D) - 3.9375 inch
Minimum Outside Diameter (D) - 3.9367 inch
Inner Ring Width (B) - 2.187 inch
Outer Ring Width (C) - 1.875 inch
Sphere Diameter (K) - 3.59 inch
Unmounted Diametral Clearance - 0.004/0.008 inch
Shaft Shoulder Diameter (d1) - 2.844 inch
Tilt Angle (α) - 12°
Maximum Shaft Fillet (r1) - 0.022 inch
Maximum Housing Fillet (r2) - 0.032 inch
Approximate Weight - 4.09 lbs
Static Radial Load Limit - 235500 lbf
Static Thrust Load Limit - 52900 lbf
Static Dynamic Load Limit - 58800 lbf
Maximum Recommended Shaft Diameter ISO f6 (Slip Fit) - 2.4988 lbf
Minimum Recommended Shaft Diameter ISO f6 (Slip Fit) - 2.4981 lbf
Maximum Recommended Shaft Diameter ISO m5 (Press Fit) - 2.501 inch
Minimum Recommended Shaft Diameter ISO m5 (Press Fit) - 2.5005 inch
Maximum Recommended Housing Bore ISO R7 (Press Fit) - 3.9359 inch
Minimum Recommended Housing Bore ISO R7 (Press Fit) - 3.9345 inch
Principal Dimensions & Load Ratings (Metric) :
Approximate Weight - 1.855 kg
Notes about B....L Series :
These bearings are built to handle substantial radial loads even when misalignment occurs. They can also support a moderate amount of thrust load. Featuring a non-separable design with a single split outer ring, they are offered in both open and sealed configurations, and are available in both inch and metric dimensions.
Other salient points to be noted :
• Bore dimensions apply after MoS2 coating. All other dimensions are before coating.
• Ultimate static and impact loads should not exceed 150% of catalog ratings.
♦ ♦ Images are for representation purposes only
Item Number - B40-L RBC
Category - Radial spherical Plain Bearing
Basic Part Number - (-40)
Principal Dimensions & Load Ratings (Imperial) :
Nominal Inside Diameter (d) - 2.5 inch
Maximum Inside Diameter (d) - 2.5 inch
Minimum Inside Diameter (d) - 2.4994 inch
Nominal Outside Diameter (D) - 3.9375 inch
Maximum Outside Diameter (D) - 3.9375 inch
Minimum Outside Diameter (D) - 3.9367 inch
Inner Ring Width (B) - 2.187 inch
Outer Ring Width (C) - 1.875 inch
Sphere Diameter (K) - 3.59 inch
Unmounted Diametral Clearance - 0.004/0.008 inch
Shaft Shoulder Diameter (d1) - 2.844 inch
Tilt Angle (α) - 12°
Maximum Shaft Fillet (r1) - 0.022 inch
Maximum Housing Fillet (r2) - 0.032 inch
Approximate Weight - 4.09 lbs
Static Radial Load Limit - 235500 lbf
Static Thrust Load Limit - 52900 lbf
Static Dynamic Load Limit - 58800 lbf
Maximum Recommended Shaft Diameter ISO f6 (Slip Fit) - 2.4988 lbf
Minimum Recommended Shaft Diameter ISO f6 (Slip Fit) - 2.4981 lbf
Maximum Recommended Shaft Diameter ISO m5 (Press Fit) - 2.501 inch
Minimum Recommended Shaft Diameter ISO m5 (Press Fit) - 2.5005 inch
Maximum Recommended Housing Bore ISO R7 (Press Fit) - 3.9359 inch
Minimum Recommended Housing Bore ISO R7 (Press Fit) - 3.9345 inch
Principal Dimensions & Load Ratings (Metric) :
Approximate Weight - 1.855 kg
Notes about B....L Series :
These bearings are built to handle substantial radial loads even when misalignment occurs. They can also support a moderate amount of thrust load. Featuring a non-separable design with a single split outer ring, they are offered in both open and sealed configurations, and are available in both inch and metric dimensions.
Other salient points to be noted :
• Bore dimensions apply after MoS2 coating. All other dimensions are before coating.
• Ultimate static and impact loads should not exceed 150% of catalog ratings.
♦ ♦ Images are for representation purposes only
