80385/80325 TIMKEN

Brand - TIMKEN
Item Number - 80385/80325 TIMKEN
Also Known As - 80385 - 80325
Category - Single Row Tapered Roller Bearing (TS Type)
Bore Diameter (d) mm - 431.8
Bore Diameter (d) inch - 17
Outer Diameter (D) mm - 533.4
Outer Diameter (D) inch - 21
Width (T) mm - 46.038
Width (T) inch - 1.8125
Dynamic Load Rating (C1) N - 624000
Dynamic Load Rating (C1) lbf - 140000
Factor (e) - 0.31
Factor (Y) - 1.96
Basic Dynamic Radial Load Rating (90 Million Revolution) (C90) N - 162000
Basic Dynamic Radial Load Rating (90 Million Revolution) (C90) lbf - 36400
Basic Dynamic Thrust Load Rating (90 Million Revolution) (Ca90) N - 84700
Basic Dynamic Thrust Load Rating (90 Million Revolution) (Ca90) lbf - 19000
Ratio of Basic Dynamic Radial Load Rating to Basic Dynamic Thrust Rating (K) - 1.91
Basic Static Radial Load Rating (C0) N - 1520000
Basic Static Radial Load Rating (C0) lbf - 342000
Cone Width (B) mm - 46.038
Cone Width (B) inch - 1.8125
Cup Width (C) mm - 34.925
Cup Width (C) inch - 1.375
Effective Center Location (a) mm - 23.4
Effective Center Location (a) inch - 0.92
Maximum Shaft Fillet Radius (R) mm - 3.3
Maximum Shaft Fillet Radius (R) inch - 0.13
Cone Frontface Backing Diameter (da) mm - 446
Cone Frontface Backing Diameter (da) inch - 17.56
Cone Backface Backing Diameter (db) mm - 450
Cone Backface Backing Diameter (db) inch - 17.72
Max Housing Fillet Radius (r) mm - 3.3
Max Housing Fillet Radius (r) inch - 0.13
Cup Frontface Backing Diameter (Da) mm - 510
Cup Frontface Backing Diameter (Da) inch - 20.08
Cup Backface Backing Diameter (Db) mm - 510
Cup Backface Backing Diameter (Db) inch - 20.08
Cage-Cone Backface Clearance (Aa) mm - 4.1
Cage-Cone Backface Clearance (Aa) inch - 0.16
Cage-Cone Frontface Clearance (Ab) mm - 1.2
Cage-Cone Frontface Clearance (Ab) inch - 0.05
Geometry Factor (G1) - 3209.2
Geometry Factor (G2) - 802.4
Geometry Factor (Cg) - 0.1815
Weight (kg) - 21.55
Weight (lbs) - 47.49
Inner Part Number - 80385
Outer Part Number - 80325
TS - Single Row Tapered Roller Bearing

** Images are for representation purposes only