52394X/52630X TIMKEN

Brand - TIMKEN
Item Number - 52394X/52630X TIMKEN
Also Known As - 52394X - 52630X
Category - Single Row Tapered Roller Bearing (TS Type)
Bore Diameter (d) mm - 100
Bore Diameter (d) inch - 3.937
Outer Diameter (D) mm - 160
Outer Diameter (D) inch - 6.2992
Width (T) mm - 36.512
Width (T) inch - 1.4375
Dynamic Load Rating (C1) N - 211000
Dynamic Load Rating (C1) lbf - 47400
Factor (e) - 0.47
Factor (Y) - 1.26
Basic Dynamic Radial Load Rating (90 Million Revolution) (C90) N - 54700
Basic Dynamic Radial Load Rating (90 Million Revolution) (C90) lbf - 12300
Basic Dynamic Thrust Load Rating (90 Million Revolution) (Ca90) N - 44500
Basic Dynamic Thrust Load Rating (90 Million Revolution) (Ca90) lbf - 10000
Ratio of Basic Dynamic Radial Load Rating to Basic Dynamic Thrust Rating (K) - 1.23
Basic Static Radial Load Rating (C0) N - 343000
Basic Static Radial Load Rating (C0) lbf - 77000
Cone Width (B) mm - 36.116
Cone Width (B) inch - 1.4219
Cup Width (C) mm - 26.195
Cup Width (C) inch - 1.0313
Effective Center Location (a) mm - -0.5
Effective Center Location (a) inch - -0.02
Maximum Shaft Fillet Radius (R) mm - 3.5
Maximum Shaft Fillet Radius (R) inch - 0.14
Cone Frontface Backing Diameter (da) mm - 109
Cone Frontface Backing Diameter (da) inch - 4.29
Cone Backface Backing Diameter (db) mm - 116
Cone Backface Backing Diameter (db) inch - 4.57
Max Housing Fillet Radius (r) mm - 3
Max Housing Fillet Radius (r) inch - 0.12
Cup Frontface Backing Diameter (Da) mm - 153
Cup Frontface Backing Diameter (Da) inch - 6.02
Cup Backface Backing Diameter (Db) mm - 144
Cup Backface Backing Diameter (Db) inch - 5.67
Cage-Cone Backface Clearance (Aa) mm - 4.4
Cage-Cone Backface Clearance (Aa) inch - 0.17
Cage-Cone Frontface Clearance (Ab) mm - 2.5
Cage-Cone Frontface Clearance (Ab) inch - 0.1
Geometry Factor (G1) - 175.4
Geometry Factor (G2) - 41.7
Geometry Factor (Cg) - 0.1519
Weight (kg) - 2.59
Weight (lbs) - 5.72
Inner Part Number - 52394X
Outer Part Number - 52630X
TS - Single Row Tapered Roller Bearing

** Images are for representation purposes only