039384 DODGE - P4B332-USAF-700TT

Brand - DODGE
Item Number - 039384 DODGE - P4B332-USAF-700TT
Category - USAF 300 Direct Mount Pillow Block With TRIPLE-TECT Seal Assembly
Shaft Diameter (S-2) inch - 7
Shaft Diameter (S-3) inch - 6.0625
Bore Diameter (mm) - 160
Description - P4B332-USAF-700TT
Housing Item Number - 039753 DODGE - H4S-332-USAF
Bearing Item Number - 423138 DODGE - BRG22332C3
Dynamic Capacity (C) lbs - 325000
Maximum Rpm (Grease) - 1000
Shaft Locknut Item Number - 041066 DODGE - AN32
Lockwasher Item Number - 419170 DODGE - W32
TRIPLE-TECT Seal Item Number (S-2) - 043565 DODGE - 72TT700
TRIPLE-TECT Seal Item Number (S-3) - 046415 DODGE - 64TT601
LER Seal Item Number (S-2)* - 042538 DODGE - 72LER700
LER Seal Item Number (S-3)* - 045953 DODGE - 64LER601
End Cover Item Number - 040681 DODGE - EC64
Housing - 332
A1 (inch) - 10.81
Overall Length (B) inch - 28
C (inch) - 7.5
Bolt to Bolt Minimum Distance (D min) inch - 21.63
Bolt to Bolt Maximum Distance (D max) inch - 24.38
E (inch) - 4.5
F-Bolt Diameter (inch) - 1.25
H (inch) - 3.13
Overall Height (J) inch - 15.81
K (inch) - 5.06
Base to Center Height (M) inch - 7.88
P (inch) - 18
Q (inch) *** - 3.44
S (inch) **** - 0.19
Static Oil Level (W) inch - 2.69
X (inch) - 4.75
Y (inch) - 1.61
Drain Hole Size - 1/2-14NPSF

Notes :
P4B - 4 Bolt Base Pillow Block, Cast Iron, Both Ends Open
3XX - For Direct Mount 22300 Series Bearing
USAF - UNIFIED SAF Pillow Block (Inch Dimensions)
700 - 7”
H4S - 4 Bolt Base Pillow Block, Cast Iron, Both Ends Open
3XX - For Direct Mount 22300 Series Bearing
BRG - Roller Bearing
222 - 22200 Series
C3 - Bearing clearance

* LER seals are made from Aluminum
*** Distance shaft should extend beyond housing centerline if pillow block is closed end style
**** Non-expansion bearing offset from centerline. For expansion bearing S = 0

***** Images are for representation purposes only