039374 DODGE - P4B314-USAF-304TT

Brand - DODGE
Item Number - 039374 DODGE - P4B314-USAF-304TT
Category - USAF 300 Direct Mount Pillow Block With TRIPLE-TECT Seal Assembly
Shaft Diameter (S-2) inch - 3.25
Shaft Diameter (S-3) inch - 2.625
Bore Diameter (mm) - 70
Description - P4B314-USAF-304TT
Housing Item Number - 039735 DODGE - H4S-314-USAF
Bearing Item Number - 423129 DODGE - BRG22314C3
Dynamic Capacity (C) lbs - 86500
Maximum Rpm (Grease) - 2400
Shaft Locknut Item Number - 407036 DODGE - N14
Lockwasher Item Number - 419153 DODGE - W14
TRIPLE-TECT Seal Item Number (S-2) - 046470 DODGE - 32TT304
TRIPLE-TECT Seal Item Number (S-3) - 046467 DODGE - 22TT210
TTDN Seal Item Number (S-2) - 035752 DODGE - 32TTDN304
TTDN Seal Item Number (S-3) - 035749 DODGE - 22TTDN210
LER Seal Item Number (S-2)* - 046478 DODGE - 32LER304
LER Seal Item Number (S-3)* - 046475 DODGE - 22LER210
Housing - 314
A1 (inch) - 5.39
Overall Length (B) inch - 12.59
C (inch) - 3.5
Bolt to Bolt Minimum Distance (D min) inch - 9.88
Bolt to Bolt Maximum Distance (D max) inch - 11
E (inch) - 2.13
F-Bolt Diameter (inch) - 0.625
H (inch) - 1.25
Overall Height (J) inch - 7.38
K (inch) - 2.47
Base to Center Height (M) inch - 3.75
P (inch) - 8.19
Q (inch) *** - 1.64
S (inch) **** - 0.19
Static Oil Level (W) inch - 1.47
X (inch) - 1.13
Y (inch) - 1.06
Drain Hole Size - 3/8-18NPSF

Notes :
P4B - 4 Bolt Base Pillow Block, Cast Iron, Both Ends Open
3XX - For Direct Mount 22300 Series Bearing
USAF - UNIFIED SAF Pillow Block (Inch Dimensions)
H4S - 4 Bolt Base Pillow Block, Cast Iron, Both Ends Open
3XX - For Direct Mount 22300 Series Bearing
BRG - Roller Bearing
222 - 22200 Series
C3 - Bearing clearance

* LER seals are made from Aluminum
*** Distance shaft should extend beyond housing centerline if pillow block is closed end style
**** Non-expansion bearing offset from centerline. For expansion bearing S = 0

***** Images are for representation purposes only