039195 DODGE - P4B222-USAF-414TT

Brand - DODGE
Item Number - 039195 DODGE - P4B222-USAF-414TT
Category - USAF 200 Direct Mount Pillow Block with TRIPLE-TECT Seal Assembly
Shaft Diameter (S-2) inch - 4.875
Shaft Diameter (S-3) inch - 4.1875
Bearing Bore Diameter (mm) - 110
Description - P4B222-USAF-414TT
Housing Item Number - 039702 DODGE - H4S-222-USAF
Bearing Item Number - 421270 DODGE - BRG22222C3
Dynamic Capacity (C) lbs - 122000
Maximum RPM (Grease) - 2000
Locknut Item Number - 460906 DODGE - AN22
Lock Washer Item Number - 419160 DODGE - W22
TRIPLE-TECT Seal Item Number (S-2) - 046408 DODGE - 56TT414
TRIPLE-TECT Seal Item Number (S-3) - 043553 DODGE - 52TT403
TTDN Seal Item Number (S-2) - 039297 DODGE - 56TTDN414
TTDN Seal Item Number (S-3) - 039863 DODGE - 52TTDN403
LER Seal Item Number (S-2)* - 042098 DODGE - 56LER414
LER Seal Item Number (S-3)* - 042525 DODGE - 52LER403
End Cover Item Number - 040710 DODGE - EC52
Housing - 222
A1 (inch) - 7.08
Overall Length (B) inch - 16.5
C (inch) - 4.75
Bolt to Bolt Minimum Distance (D min) inch - 12.59
Bolt to Bolt Maximum Distance (D max) inch - 14.5
E (inch) - 2.75
F-Bolt Diameter (inch) - 0.75
Housing - 222
H (inch) - 1.78
Overall Height (J) inch - 9.41
K (inch) - 3.3
Base to Center Height (M) inch - 4.94
P (inch) - 10.59
Q (inch) *** - 2.09
S (inch) **** - 0.19
Static Oil Level (W) inch - 1.8
X (inch) - 2.88
Y (inch) - 1.34
Drain Hole Size - 3/8-18NPSF

Notes :
P4B - 4 Bolt Base Pillow Block, Cast Iron, Both Ends Open
2XX - For Direct Mount 22200 Series Bearing
USAF - UNIFIED SAF Pillow Block (Inch Dimensions)
TT - TRIPLE-TECT
H4S - 4 Bolt Base Pillow Block, Cast Iron, Both Ends Open
2XX - For Direct Mount 22200 Series Bearing
BRG - Roller Bearing
222 - 22200 Series
K - Tapered Adapter Sleeve Mounting. Otherwise Bearing Has Cylindrical Bore for Direct Mounting
C3 - Bearing clearance

* LER seals are made from Aluminum
*** Distance shaft should extend beyond housing centerline if pillow block is closed end style
**** Non-expansion bearing offset from centerline. For expansion bearing S = 0

***** Images are for representation purposes only