039185 DODGE - P4B217-USAF-315TT

Brand - DODGE
Item Number - 039185 DODGE - P4B217-USAF-315TT
Category - USAF 200 Direct Mount Pillow Block with TRIPLE-TECT Seal Assembly
Shaft Diameter (S-2) inch - 3.9375
Shaft Diameter (S-3) inch - 3.1875
Bearing Bore Diameter (mm) - 85
Description - P4B217-USAF-315TT
Housing Item Number - 039692 DODGE - H4S-217-USAF
Bearing Item Number - 421267 DODGE - BRG22217C3
Dynamic Capacity (C) lbs - 68000
Maximum RPM (Grease) - 3000
Locknut Item Number - 460903 DODGE - AN17
Lock Washer Item Number - 419154 DODGE - W17
TRIPLE-TECT Seal Item Number (S-2) - 046404 DODGE - 42TT315
TRIPLE-TECT Seal Item Number (S-3) - 046403 DODGE - 32TT303
TTDN Seal Item Number (S-2) - 039515 DODGE - 42TTDN315
TTDN Seal Item Number (S-3) - 039292 DODGE - 32TTDN303
LER Seal Item Number (S-2)* - 042089 DODGE - 42LER315
LER Seal Item Number (S-3)* - 042088 DODGE - 32LER303
End Cover Item Number - 057260 DODGE - EC32
Housing - 217
A1 (inch) - 5.39
Overall Length (B) inch - 12.59
C (inch) - 3.5
Bolt to Bolt Minimum Distance (D min) inch - 9.88
Bolt to Bolt Maximum Distance (D max) inch - 11
E (inch) - 2.13
F-Bolt Diameter (inch) - 0.625
Housing - 217
H (inch) - 1.25
Overall Height (J) inch - 7.38
K (inch) - 2.47
Base to Center Height (M) inch - 3.75
P (inch) - 8.19
Q (inch) *** - 1.5
S (inch) **** - 0.19
Static Oil Level (W) inch - 1.38
X (inch) - 1.13
Y (inch) - 1.06
Drain Hole Size - 3/8-18NPSF

Notes :
P4B - 4 Bolt Base Pillow Block, Cast Iron, Both Ends Open
2XX - For Direct Mount 22200 Series Bearing
USAF - UNIFIED SAF Pillow Block (Inch Dimensions)
315 - 3-15/16”
TT - TRIPLE-TECT
H4S - 4 Bolt Base Pillow Block, Cast Iron, Both Ends Open
2XX - For Direct Mount 22200 Series Bearing
BRG - Roller Bearing
222 - 22200 Series
K - Tapered Adapter Sleeve Mounting. Otherwise Bearing Has Cylindrical Bore for Direct Mounting
C3 - Bearing clearance

* LER seals are made from Aluminum
*** Distance shaft should extend beyond housing centerline if pillow block is closed end style
**** Non-expansion bearing offset from centerline. For expansion bearing S = 0

***** Images are for representation purposes only