039181 DODGE - P4B216-USAF-310TT

Brand - DODGE
Item Number - 039181 DODGE - P4B216-USAF-310TT
Category - USAF 200 Direct Mount Pillow Block with TRIPLE-TECT Seal Assembly
Shaft Diameter (S-2) inch - 3.625
Shaft Diameter (S-3) inch - 3
Bearing Bore Diameter (mm) - 80
Description - P4B216-USAF-310TT
Housing Item Number - 039688 DODGE - H4S-216-USAF
Bearing Item Number - 421266 DODGE - BRG22216C3
Dynamic Capacity (C) lbs - 56000
Maximum RPM (Grease) - 3200
Locknut Item Number - 460902 DODGE - AN16
Lock Washer Item Number - 419152 DODGE - W16
TRIPLE-TECT Seal Item Number (S-2) - 046402 DODGE - 38TT310
TRIPLE-TECT Seal Item Number (S-3) - 043547 DODGE - 28TT300
TTDN Seal Item Number (S-2) - 039291 DODGE - 38TTDN310
TTDN Seal Item Number (S-3) - 039857 DODGE - 28TTDN300
LER Seal Item Number (S-2)* - 045931 DODGE - 38LER310
LER Seal Item Number (S-3)* - 042519 DODGE - 28LER300
End Cover Item Number - 040706 DODGE - EC28
Housing - 216
A1 (inch) - 5.44
Overall Length (B) inch - 12.59
C (inch) - 3.5
Bolt to Bolt Minimum Distance (D min) inch - 9.68
Bolt to Bolt Maximum Distance (D max) inch - 11
E (inch) - 2.13
F-Bolt Diameter (inch) - 0.625
Housing - 216
H (inch) - 1.06
Overall Height (J) inch - 6.75
K (inch) - 2.42
Base to Center Height (M) inch - 3.5
P (inch) - 7.94
Q (inch) *** - 1.44
S (inch) **** - 0.19
Static Oil Level (W) inch - 1.25
X (inch) - 1.97
Y (inch) - 0.95
Drain Hole Size - 1/4-18NPSF

Notes :
P4B - 4 Bolt Base Pillow Block, Cast Iron, Both Ends Open
2XX - For Direct Mount 22200 Series Bearing
USAF - UNIFIED SAF Pillow Block (Inch Dimensions)
TT - TRIPLE-TECT
H4S - 4 Bolt Base Pillow Block, Cast Iron, Both Ends Open
2XX - For Direct Mount 22200 Series Bearing
BRG - Roller Bearing
222 - 22200 Series
K - Tapered Adapter Sleeve Mounting. Otherwise Bearing Has Cylindrical Bore for Direct Mounting
C3 - Bearing clearance

* LER seals are made from Aluminum
*** Distance shaft should extend beyond housing centerline if pillow block is closed end style
**** Non-expansion bearing offset from centerline. For expansion bearing S = 0

***** Images are for representation purposes only