039175 DODGE - P2B215-USAF-307TT

Brand - DODGE
Item Number - 039175 DODGE - P2B215-USAF-307TT
Category - USAF 200 Direct Mount Pillow Block with TRIPLE-TECT Seal Assembly
Shaft Diameter (S-2) inch - 3.4375
Shaft Diameter (S-3) inch - 2.8125
Bearing Bore Diameter (mm) - 75
Description - P2B215-USAF-307TT
Housing Item Number - 039682 DODGE - H2S-215-USAF
Bearing Item Number - 421265 DODGE - BRG22215C3
Dynamic Capacity (C) lbs - 48000
Maximum RPM (Grease) - 3400
Locknut Item Number - 460901 DODGE - AN15
Lock Washer Item Number - 419150 DODGE - W15
TRIPLE-TECT Seal Item Number (S-2) - 046401 DODGE - 38TT307
TRIPLE-TECT Seal Item Number (S-3) - 046400 DODGE - 24TT213
TTDN Seal Item Number (S-2) - 039568 DODGE - 38TTDN307
TTDN Seal Item Number (S-3) - 039289 DODGE - 24TTDN213
LER Seal Item Number (S-2)** - 045928 DODGE - 38LER307
LER Seal Item Number (S-3)** - 045927 DODGE - 24LER213
End Cover Item Number - 040705 DODGE - EC24
Housing - 215
A1 (inch) - 5.2
Overall Length (B) inch - 11.13
C (inch) - 3.13
Bolt to Bolt Minimum Distance (D min) inch - 8.63
Bolt to Bolt Maximum Distance (D max) inch - 9.68
E (inch) - 1.88
F-Bolt Diameter (inch) - 0.625
Housing - 215
H (inch) - 1.25
Overall Height (J) inch - 6.44
K (inch) - 2.31
Base to Center Height (M) inch - 3.25
P (inch) - 7.06
Q (inch) *** - 1.39
S (inch) **** - 0.13
Static Oil Level (W) inch - 1.16
X (inch) - 1.78
Y (inch) - 0.88
Drain Hole Size - 1/4-18NPSF

Notes :
P2B - 2 Bolt Base Pillow Block, Cast Iron, Both Ends Open
2XX - For Direct Mount 22200 Series Bearing
USAF - UNIFIED SAF Pillow Block (Inch Dimensions)
307 - 3-7/16”
TT - TRIPLE-TECT
H2S - 2 Bolt Base Pillow Block, Cast Iron, Both Ends Open
2XX - For Direct Mount 22200 Series Bearing
BRG - Roller Bearing
222 - 22200 Series
K - Tapered Adapter Sleeve Mounting. Otherwise Bearing Has Cylindrical Bore for Direct Mounting
C3 - Bearing clearance

** LER seal is manufactured from Steel
*** Distance shaft should extend beyond housing centerline if pillow block is closed end style
**** Non-expansion bearing offset from centerline. For expansion bearing S = 0

***** Images are for representation purposes only