FAG Detector III Vibration Monitoring System

The following components are included in the scope of delivery:
diagnostic device with rechargeable battery, accelerometer with two magnetic feet for flat and curved surfaces, temperature sensor, battery charger with adapters for worldwide use, PC data cable (serial, USB), user manual, protective bag with holder for temperature sensor, PC software Trendline, Case; During operation, unbalance can generate considerable vibrations that lead to secondary damage such as premature bearing wear or fatigue fractures. This results in machine failure and thus unplanned production shutdowns. FAG Detector III was therefore developed to facilitate the reliable detection and subsequent elimination of unbalances.
FAG Detector III is a handy, easy to use vibration measurement device that can be used to reliably identify cases of incipient damage and eliminate their causes. Preinstalled standard configurations in accordance with DIN ISO 10816 make FAG Detector III a Plug-and-Play solution and allow authoritative information on the machinery condition, entirely without time-consuming training or system configuration. This allows rapid inspection of machinery and subassemblies. The user simply has to start the measurement process by pressing a few buttons and wait until it is completed. Interpretation of the measurement results is carried out in a selfexplanatory manner by means of simple symbols on the device display.
Advantages of the system: No prior knowledge required for use of basic functions, Parallel monitoring of vibration and temperature, Static and dynamic balancing on site, Wide range of options for analysis and presentation
, Simple and easy to use, Excellent price/performance ratio, Limitless possibilities for development while giving maximum investment protection.
Areas of application: Machine vibrations are a good indicator of the condition of a machine. FAG Detector III can be used to monitor vibrations, such as machine vibrations according to ISO 10816 and the condition of rolling bearings by means of the demodulated signal detection method. FAG Detector III is thus a highly suitable device for the detection of: ■ unbalances and misalignments, ■ rolling bearing damage, ■ gearbox damage (tooth sets), A typical areas of application is the monitoring of: ■ pumps, ■ electric motors, ■ ventilators, ■ machine tools, ■ compressors, ■ gearboxes, ■ spindles.